|Project:||Ichthys Offshore Project Darwin NT Australia
Eilbeck Cranes has successfully completed Factory Acceptance Testing and delivered 5 cranes capacity ranging from 5t to 70t(50t+50t) Cranes for DSME for FPSO for the Ichthys LNG offshore Project.
The cranes have successfully passed a rigorous quality and hazardous testing phase by the client, prooving once again Eilbeck’s commitment and proficiency in manufacturing and commisioning for Ex-proof environment.
All cranes have been upgraded from European Standard compliance to Australian Standard IEC EX compliance, required for explosion proof cranes.
Next up 1x 25t Semi Portal Crane and 1 x 5t Single Girder Crane for SHI for the same project are currently being manufactured.
|70t (50t+50t) +2 x 5t||13.8m||23m||Double Girder Overhead travelling Crane Thruster Handling Crane||FPSO||100% redundancy in all motion with special Centrifugal brake for lowering of load in case of power failure|
|27.5t / 5t||7.19m||24m||Double Girder Overhead travelling Crane Air Lock AFT||FPSO||Manual Brake release & Hazardous area|
|12.5t||5.4m||28.5m||Single Girder Underslung Crane Air Lock FWD||FPSO||Manual Brake release & Hazardous area|
|6.3t||3.65m||20m||Single Girder Underslung Crane FWD Workshop||FPSO||Manual Brake release|
|5t||5.4m||6m||Single Girder Underslung Crane AFT Workshop||FPSO||Manual Brake release|
All cranes have passed though the following:
70t crane load testing
27.5t crane load testing
12.5t underslung cranes under load test
5t and 6.3t underslung cranes
Special features of these cranes:
The next crane 1 off 25t Semi Portal Crane is also under manufacturing. Also 1 of crane 5t Single Girder Crane for SHI for the same project with same specification is under manufacturing and inspection.